Skip to product information
SKU:
In stock
26405
AOD Street Bandit 35-4,200 RPM Lock Up Ford Torque Converter Part Number 26405
$665.33
Ford AOD Torque Converter - Street Bandit Series (Part #: 26405)
Elevate your transmission performance with the Street Bandit Series Torque Converter, precision-engineered for the Ford AOD installation. This high-quality aftermarket replacement is built to handle demanding driving conditions while maintaining factory integrity, providing optimal power transfer and reliability for your rebuild or performance build.
Constructed with attention to detail, this converter ensures a smooth match and dependable operation for your 3-step input shaft transmission.
Key Product Specifications
- Transmission Application: Ford AOD (3-Step Input Shaft)
- Series/Model: Street Bandit Series
- Part Number: 26405
- Stall Range: 3,500 - 4,200 RPM Stall
- Core Size: Factory 10-inch Core with Factory Front Cover
- Input Shaft Spline: 35 Spline
- Bolt Circle Diameter: 11.7/16 inches
Advanced Construction Details
- Stator: Modified Heavy Duty Stator
- Impeller Hub: Hardened Chrome Moly
- Bearings: Torrington Style Incased Bearings for durability
- Lockup: Over Sized Extreme Duty Lock Up
- Crank Pilot Bore: Factory 1.375 inch
- Hardware: 3/8 X 24 TPI Nuts
- Quality Control: Digitally Balanced, Leak & Pressure Tested, Quality Inspections at Every Step
- Manufacturing: 4 Corner Tac Welded Fins or Furnace Brazed
Application Guidance
- Use Old School Type F Transmission Fluid for optimal performance.
- Always utilize an additional BOSS HOG transmission cooler for high-heat operation.
- Apply Blue Loctite to fasteners during installation.
Important Notes
- All advertised stall ranges are based on a specific vehicle setup and may vary depending on your installation configuration. Please contact us with more information regarding your application.
- We recommend considering our "Out Law Series" converters if you plan to add power adders such as Nitrous Oxide (NOS), Turbochargers, or Superchargers.
Building high performance and racing converters since 1970. Veteran owned and family run.
| Actual Stall | Stall Range Will vary or change depending on Engine/Weight/& Run Out of the Gear. |
| Anti-Ballooning Plates | NO |
| Balanced | Yes |
| Bell Housing | All |
| Bolt Circle | 11.4375 |
| Bolt Size | 3/8 X24 TPI GRADE 8 ONLY |
| Crank Pilot | 1.375 |
| Diameter Core | 10 inch |
| Lock Up | Yes |
| Series | Street Bandit |
| Spline | 35 |
| Stall Range | 3500-4,200 RPM |
| Torrington Bearings | Yes |
| Weled Fins | 4 cornered |
