26010 FORD C6 FE Night Stalker Stock Replacement No Stall Added Torque Converter

Description

Ford
C6
FE Motors
BIG Pilot
NIGHT STALKER SERIES
This is A Stock Stall
Stall Range: Stock Stall – NO Stall Added
If this Converter Pulls the Motor Down, Need more Stall
12 inch Core
Bolt Circle: 11 7/16 inches
31 Spline Turbine Hub Precision CNC Machined
Count the Tops of Each Tooth on the Smaller Shaft
Built to 5 7/8 inch Tall
For the Big Bellhousing
Use the 164 Tooth Flywheel
Hardened Chrome Moley Impeller Hub
Torrington Style Incased Bearings
Modified Extreme Duty Stator
1.848 inch Crank Pilot Precision CNC Machined
Bolt Size: 3/8 X 16 TPI (GRADE 8 ONLY)
NO – Anti-Balloon Plates
Fins are 4 corner Tac Welded or Furnace-Brazed
Leak & Pressure Tested
Digitally Balanced
Quality Inspections at Every Step
TIP : Use Type F transmission Fluid for Best Results
TIP : Always Use an Additional Transmission Cooler
TIP : Use Blue Loctite

MADE IN THE USA

* NOTE : ALL Advertised Stalls are based on a Specific Vehicle’s Setup. All stall Ranges Will Vary depending on your vehicle’s setup. Please contact us for more information (888) 267-7464

Building High Performance & Racing Converters Since 1970!

We recommend upgrading to a “Street Bandit Series” torque converter if you have upgraded 2 items like; Intake, Heads, Headers, Exhaust, Cam, or Gearing

We recommend upgrading to an “Out Law Racing Series” torque converter if you have any Power Adders like Nitrous (NOS), Turbocharger(s), Supercharger, or a Trans Brake

Warning: Cancer and Reproductive Harm – www. P65warning.ca.gov