4L60E 4L65E 4L70E 300mm Street Bandit 35-4,200 RPM NON-Lock Up Torque Converter Part Number 49075 GM LS

$725.04

This Converter is one of The Lightest Weight Converters on the market. In some Cases, by more than 20 lbs for Huge Power Gains through Less Rotational Mass. Always New Torrington style bearings & Extreme Duty lock up liner. No Short Cuts, We do the Work.

Building High Performance & Racing Converters Since 1970!

MADE IN THE USA

UPC: 678118490756

Description

GM LS 49075
4L60E
4L65E
4L70E

STREET BANDIT SERIES
* 300mm (LS Engines)
For the 2 step input shaft
Super Lightweight Converter
Stall Range: 3,500 – 4,200 RPM
9.6 inch Core
Bolt Circle: 11.063 inch
30 Spline Input Shaft
Hardened Chrome Molly Impeller Hub
Torrington Style Incased Bearings
Lock Up – DELETED
1.703 inch Crank Pilot
Bolt Size: 3/8 X 16 TPI (GRADE 8 ONLY)
NO – Anti-Ballooning Plate
The Pump & Turbine Fins are 4 Corner Tac Welded or Furnish Brazed
Leak & Pressure Tested
Digitally Balanced
TIP : Use Type F transmission Fluid for Best Results
TIP : Always Use an Additional Transmission Cooler
TIP : Use Blue Loctite

MADE IN THE USA

* NOTE: ALL Advertised stalls are based on a specific vehicle’s setup. All Stall Ranges Will Vary depending on Your Vehicle’s Setup. Please contact us for more information – 888-267-7464

Building High Performance & Racing Converters Since 1970!

We recommend upgrading to an “Out Law Series” torque converter if you have any power adders like Nitrous (NOS), Turbocharger(s), Supercharger, or a Trans Brake

Warning: Cancer and Reproductive Harm – www. P65warning.ca.gov

Reviews

There are no reviews yet.

Be the first to review “4L60E 4L65E 4L70E 300mm Street Bandit 35-4,200 RPM NON-Lock Up Torque Converter Part Number 49075 GM LS”
37408